Video Guides | Step By Step | Repack | Repair
Preliminary Steps: Move tent carts into position near the tent which will be being disassembled for quicker re-load. Locate the inflator/deflator units and cases for final deflation and storage of the tent(s).

NOTE: Prior to deflation and Demobilizing, ALL SURFACES OF THE TENT (INSIDE AND OUT) MUST BE DRY AND FREE OF DEBRIS BEFORE RE-PACKING.
Repack 1 - Unplug the AirGuard
Unplug and remove the AirGuard from the tent by sliding back the outer housing of the AIV.
Repack 2 - Begin Deflation
Deflate the tent by opening the twist cap then pushing and turning the fill valve counterclockwise to mostly deflate the tent.
Repack 3 - Aided Deflation
Turn “ON” one (1) motor of the unit, attach the deflation hose and cap assembly to the opposite end of the inflator/deflator and the hose end to the inflation port on the tent to proceed with deflation.
Repack 4 - Fold and Roll
Once the tent structure is completely deflated, fold and roll the tent into the cover (use the Tent Folding Diagram below). Cinch the straps closed and transport tent to storage area.
Repack 5 - Assist
NOTE: It is very important that the tent is completely deflated and then rolled as tightly as possible.
If you have any difficulty during set-up, making repairs or need any other assistance, please call 888-236-1267 for support. An agent can assist you and provide answers to your questions.